1. Product Overview

DAQ-GP-CT485 split core current transformer is a kind of current sensor (transformer) which can convert AC analog signal into RS485 digital signal launched by Shanghai Data Acquisition IOT Technology Co., LTD. The product has built-in 32-bit ARM series MCU and high-precision metering chip, and is a multi-point calibrated current conversion module. It has the characteristics of high precision and fast response. DAQ-GP-CT485 can directly interact with common data acquisition gateways, DTU, programmable controller PLC, and host computer.
This product is widely used in AC motor, lighting equipment, air compressor, heating ventilation and air conditioning equipment, building self-control system, equipment OEE open rate, industrial Internet, rural power transformation projects and other scenarios of current monitoring and acquisition scenarios.
2 Service Concept
Our company solemnly promise you:
You buy more than just products, but also meticulous and thoughtful technical support.
We provide free remote guidance, remote configuration and commissioning services, and send data to the server specified by the customer.
Free IOT solution consulting services!
3 Product Characteristic Parameters
Line Sequence Definition
Red:+12V Black:GND Yellow:485A White:485B
Length of Line:Default 1 meter
Acquisition Characteristic
l Current detection range: AC 0.2A-100A,Other large range transformers can be customized
Electrical Characteristic
l Power supply mode:5~24V DC
l Operating power consumption:0.5W
l Operating frequency:50-60Hz
Communication Characteristic
l Transmission mode:RS485
l Communication protocol: Modbus RTU
Structural Characteristic
l Material:ABS plastic (enclosure)
l Installation method:Buckle mounting
Working Environment
l Temperature: -20°C~70°C
Storage Environment
l Temperature: -20°C~80°C
4 The Core Advantages of the Product
Ø High precision measuring chip, high measurement accuracy
Ø Open type design, easy to install
Ø Easy installation and fast deployment, helping IOT projects land quickly
5 Description of the Modbus Communication Protocol
5.1 Serial Port Communication Parameters
Baud rate:9600 Data bit:8 Verify:NONE Stop bit:1
5.2 Function Code Definition
The upper computer uses 03 function code to read data or receive alarm data.
The host computer controls the lower machine equipment (transformer) using 06 function code.
5.3 Register Point Table Definition
Register table:
Serial number | Register address | Instructions | Read/Write | Data type |
1 | 0x01 | Device address (default 1) | Read/Write | 16-bit |
2 | 0x02 | Sensor data is 16 bits higher | Read | 16-bit |
3 | 0x03 | Sensor data is 16 bits lower | Read | 16-bit |
4 | 0x04 | Baud rate | Read/Write | 16-bit |
5 | 0x05 | Reserve |
| 16-bit |
6 | 0x06 | Reserve |
| 16-bit |
7 | 0x07 | Reserve |
| 16-bit |
5.4 Communication Packet Examples
Give an example:
Host reads the sensor value:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Device address | Function code | The register address is 8 bits higher | The register address is 8 bits lower | The number of read registers is 8 bits higher | The number of read registers is 8 bits lower | The CRC is 8 bits higher | The CRC is 8 bits lower |
0x01 | 0x03 | 0x00 | 0x01 | 0x00 | 0x02 | 0x95 | 0xCB |
|
|
|
|
|
|
|
|
Return data from slave:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
Device address | Function code | Number of bytes | Register value [31:24] | Register value [23:16] | Register value [15:8] | Register value [7:0] | The CRC is 8 bits higher | The CRC is 8 bits lower |
0x01 | 0x03 | 0x04 | 0x00 | 0x00 | 0x27 | 0x10 | 0xE0 | 0x0F |
The register value is 0x00002710, and the decimal notation is 10000. Assuming that the AC transformer ranges from 0 to 100A, the current is 100A.
Changing a device address:(0x01 is changed to 0x02)
Host sending:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Device address | Function code | The register address is 8 bits higher | The register address is 8 bits lower | The register value is 8 bits higher | The register value is 8 bits higher | The CRC is 8 bits higher | The CRC is 8 bits lower |
0x01 | 0x06 | 0x00 | 0x00 | 0x00 | 0x02 | 0x08 | 0x0B |
Return data from slave:
The new address takes effect only after the current device address is returned from the slave.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Device address | Function code | The register address is 8 bits higher | The register address is 8 bits lower | The register value is 8 bits higher | The register value is 8 bits higher | The CRC is 8 bits higher | The CRC is 8 bits lower |
0x01 | 0x06 | 0x00 | 0x00 | 0x00 | 0x01 | 0x48 | 0x0A |
Modified baud rate:(9600 is changed to 1200)
Host sending:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Device address | Function code | The register address is 8 bits higher | The register address is 8 bits lower | The register value is 8 bits higher | The register value is 8 bits higher | The CRC is 8 bits higher | The CRC is 8 bits lower |
0x01 | 0x06 | 0x00 | 0x04 | 0x00 | 0x02 | 0x49 | 0xCA |
Return data from slave:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Device address | Function code | The register address is 8 bits higher | The register address is 8 bits lower | The register value is 8 bits higher | The register value is 8 bits higher | The CRC is 8 bits higher | The CRC is 8 bits lower |
0x01 | 0x06 | 0x00 | 0x04 | 0x00 | 0x02 | 0x49 | 0xCA |
(Note: The baud rate takes effect only after the device is powered on again. Change back to 9600 host and send 01 06 00 04 00 05 08 08)
Baud rate register (0x04) Value description:
Register address | Register value | Attributes (Baud rate) |
0x04 | 0x00 | 300 |
0x01 | 600 |
0x02 | 1200 |
0x03 | 2400 |
0x04 | 4800 |
0x05(Factory default) | 9600 |
0x06 | 19200 |
0x07 | 38400 |
0x08 | 43000 |
0x09 | 56000 |
0x0a | 57600 |
0x0b | 115200 |
If the baud rate is set outside the range, the slave will return the current register value without changing the baud rate.
6 Application Cases

Collection of current data of production equipment in textile factory
In this case, 4G wireless open-type AC sensor is used to collect current data, and the data is displayed on the cloud platform. The data can be accessed and viewed through websites, apps, WeChat mini programs, etc.
❓ RS485 Split Core Current Sensor – FAQ
1. What is an RS485 Split Core Current Sensor used for?
It is used for real-time current measurement in industrial IoT systems, energy monitoring, and power distribution management without interrupting the power line.
2. What is the advantage of a split core design?
The split core design allows installation without disconnecting cables or shutting down equipment, making it ideal for retrofit and live electrical systems.
3. What communication protocol does it support?
It supports RS485 Modbus RTU protocol, enabling easy integration with PLC, SCADA, and IoT energy monitoring platforms.
4. Can it be used for remote monitoring?
Yes, it can transmit real-time current data to IoT gateways or cloud platforms for remote monitoring and energy management.
5. How accurate is the current measurement?
The sensor provides high-precision and stable current measurement with strong anti-interference capability suitable for industrial environments.
6. What systems can it integrate with?
It can be integrated with PLC systems, SCADA systems, energy management systems (EMS), and industrial IoT platforms.
7. Where is this current sensor commonly used?
It is widely used in smart factories, industrial automation, power distribution systems, solar PV systems, and wind energy monitoring.
8. Does it require power interruption during installation?
No. The split core design allows installation without interrupting power, ensuring safe and fast deployment.